Maxim M30B Especificaciones descargar pdf (Pagina 10)

_________________________________________________________________________________________________

DS33M33DK

Rev: 102108 10 of 48

11. Installing and Running the Software

ChipView is a general-purpose program that supports a number of Maxim demo kits. To install the ChipView

software, run Chipview.msi from the disk included in the DS33M33DK box or from the zip file downloadable on our

website at

www.maxim-ic.com/DS33M33DK.

After installation, run the ChipView program with the DS33M33DK board powered up and connected to the PC. If

the default installation options were used, one easy way to run ChipView is to click the Start button on the

Windows toolbar and select Programs→ChipView→ChipView. In the opening screen, click the Register View

button. Select the correct serial port in the Port Selection dialog box, then click OK.

Next, the Definition File Assignment window appears. This window has subwindows to select definition files for

up to four separate boards on other Maxim evaluation platforms. In the active subwindow, select the

_DS33M_GlobalSonet.def definition file from the list shown, or browse to find it in another directory. Press the

Continue button.

After selecting the definition file, the main part of the ChipView window displays the DS33M33’s register map. To

select a register, click on it in the register map. When a register is selected, the full name of the register and its bit

map are displayed at the bottom of the ChipView window. Bits that are logic 0 are displayed in white, while bits that

are logic 1 are displayed in green.

The ChipView software supports the following actions:

• Toggle a bit. Select the register in the register map and then click the bit in the bit map.

• Write a register. Select the register, click the Write button, and enter the value to be written.

• Write all registers. Click the Write All button and enter the value to be written.

• Read a register. Select the register in the register map and click the Read button.

• Read all registers. Click the Read All button.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Sin comentarios

Maxim M30B Especificaciones Pagina 10